A1P2 Combination Cartridge for the Force™8 Half Mask with Typhoon™ Valve.
Cost effective filters for protection against particulates with low profile angle for minimum visual impairment. Cartridges have an integral maintenance free disposable inhalation valve. Easy to attach to the respirator with a secure fit when applied. P2 Dust protection filter is attached to the top of the A1 filter via a transparent clip on cover.
A1P2 cartridges are suitable for protecting your respiratory system from:
- Solvent-based painting
- Water-based painting
- Rubbing down paint
- Paint stripping
- White spirit
- Welding (ferrous and lead)
- Organic vapours and gases
- Dusts
- Mists
- Fibres and fibre glass
- Plaster
- Wood (hard and soft)
- Nuisance odours
How to maintain your Force™ Half-Mask: |
|
Cleaning the mask:
Fitting the mask and "Press to Check" the fit:
Replacing the filters:
Replace the filters periodically. If you start to smell the odour of the paint or it becomes difficult to draw air through the filter, then it is time to replace your cartridges. Preferably replace them before this occurs to ensure you are fully protected.
This short video shows how to fit the filters correctly. The video states the masks come attached as delivered, but please note that our stock is delivered with the face mask and filters separate so you will need to fit the filters as directed the first time.
PLEASE NOTE:
When installing the filters to your mask, please note that the filters do require a reasonable amount of force to be applied to rotate them into the “locked” position. This is to ensure that the gasket between the filters and the mask body is well compressed and therefore sealing the interface efficiently. When carrying out this operation, just take care not to grip the exhaust valve body inside the mask. However, you may hold the overall mask body with the required force to rotate the filters into the “locked” position. Do not twist both filters at the same time.
For more information or advice on this product, please contact us.
Force™8 F-2112 Twin A1P2 - 2 x Force™ Filters is also available as part of these sets or special offers: |
|
Click on each product for more information |