Made to order. Current lead time is 3 - 4 weeks.
The BV300S-D Airbrush Spray Booth filters and extracts fumes and vapours from aerosol paints, lacquers, adhesives (glue booth for Spray Mount) and airbrush over-spray. It extracts solder fume, general solvent vapours and gases to the atmosphere, and filters grinding dusts, general particulates and powders etc. BV300S-D is a vital equipment for hobbyists, modellers and arts and craft enthusiasts to avoid the health hazards posed by fumes and dusts.
Airbrush Spray Booth applications include filtration/removal of:
- Aerosol paints
- Lacquers
- Adhesives (glue booth for Spray Mount)
- Airbrush over-spray
- Solder fume
- General solvent vapours and gases
- Grinding dusts
- General particulates
- Powders
- and more…
Dimensions and Features:
| BV300S-D data sheet: |
|
- External dimensions (W x H x D): 505 x 390 x 430
- Steel construction finished in dove grey
- Plastic replaceable spray/fume shield
- Particulate filter
- Centrifugal blower
- External rotor
- Brushless motor type
- UL, VDE and CSA approved
- Sealed electrical wiring and switch
- Downstream of filter
- Flexi-duct 2 metres x 100 mm dia
- Carry handle
Operation:
All BenchVent filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience. This unit can be used in two positions.
Horizontal position – for Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. Accommodates artwork up to A3 size.
Vertical position – For model sprays and airbrush use – light grinding particles (not sparking) – solder fume extraction and general solvent and gas extraction.
Filtration:
The particulate (intake) filter is a three-stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5-micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.
The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposure to potentially hazardous substances.
Specification:
- Fan Motor: 230V 50Hz 105W
- Air Volume at Free Air: 355 m3/hr
- Average Air Velocity at Filter Face: 0.60m/sec
- Average Air Velocity at Hood Face: 0.55m/sec
- Noise Level LAeq dB(A): 0.55m/sec
- Weight: 11.5 kg
- Dimensions: 68 x 52 x 28 cm
- Voltage: 240V
Demonstrating adequate control of the risks to the health of employees, students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.
For more information or advice on this product, please contact us.
