Made to order. Current lead time is 3 - 4 weeks.
BV200H-D Hood Mounted Airbrushing Spray Booth Extraction Unit with Flexi-Duct.
This air extraction hood and airbrushing spray booth captures, filters and expels toxic fumes and dust for a cleaner, healthier working environment within art, graphics, design technology areas, crafts and modelling and more.
This Airbrushing Spray Booth will 99% of toxic fumes and dust from:
- Aerosol adhesives (glue booth for Spray Mount)
- Aerosol lacquers and fixatives
- Airbrush paint sprays applied to artwork
It can accommodate artwork of up to A1 size. For artwork applications, standard A1 or A2 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient over-spray capture. The workstation hood also accommodates prototypes, 3D models, ceramic parts, PCB’s etc. These can be placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc. The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience.
Dimensions & Features:
- 68 × 60 × 45 cm
- Steel construction finished in dove grey
- Fan/filter unit mounted onto hood enclosure
- Particulate filter
- Centrifugal blower external rotor motor type
- Brushless, UL, VDE and CSA approved
- Sealed electrical wiring and switch, downstream of filter
- Flexi-duct(s) 2 metres x 100mm dia. (BV100H-D has 2 ducts).
Operation:
All BenchVent filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place the unit on a desk, bench or trolley, plug in and switch on.
Specification:
- Fan Motor: 230V - 50Hz - 105W
- Air Volume at Free Air: 355 m3/hr
- Average Air Velocity at Filter Face: 0.6 m/sec
- Average Air Velocity at Hood Face: 0.25 m/sec
- Noise Level LAeq dB(A): 58 dB(A)
- Weight: 30 kg
- Voltage: 210V
Filtration: The particulate (intake) filter is a three-stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5-micron particles.
NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposures to potentially hazardous substances.
These cabinets are designed for studio / classroom / workshop cleanliness and for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct(s).
Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.
For more information or advice on this product, please contact us.
