Made to order. Current lead time is 3 - 4 weeks.
BV100H – Hood Mounted Hobby Spray Booth Filtration Cabinet
The BV100H Re-circulatory Airbrush Spray Booth captures, contains and filters for a cleaner, healthier working environment within art, graphics, design technology areas, crafts and modelling.
The BV100H can accommodate artwork up to A1 size. A2 or A1 drawing boards can be placed into the hood at an angle for efficient overspray capture. The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
Applications include filtration/removal of:
- Solvent fumes - See extraction units BV200H-D & BV100H-D for total solvent odour and gas extraction cabinets for higher specification filtration
- Aerosol paints
- Aerosol lacquers and fixatives
- Aerosol adhesives (glue booth for Spray Mount)
- Airbrush paints and over-spray
- Cleaning solvents
- Dust
- Light grinding particles
- Soldering fumes
- Can accommodate artwork up to A1 size (841 x 594 mm).
Dimensions & Features:
- Dimensions: 960 x 660 x 620 mm (HxWxD)
- Steel construction finished in dove grey
- Fan/filter unit mounted onto hood enclosure
- Particulate filter (filter particles as small as 5 microns in diameter
- Carbon impregnated fibre filter (for odour filtration)
- 2 x Axial fans with external rotor shaded-pole motor, impedance protected against overloading (UL, VDE and CSA approved)
- Sealed electrical wiring and switch, downstream of filters
Operation:
All BenchVent filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place the unit on a desk, bench or trolley, plug in and switch on.
For artwork applications, standard A1 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding etc.
Specification:
- Fan Motor: 230V - 50Hz - 105W
- Air Volume at Free Air: 650 m3/hr
- Average Air Velocity at Filter Face: 0.5m/sec
- Average Air Velocity at Hood Face: 0.25m/sec
- Noise Level LAeq dB(A): 62 dB(A)
- Weight: 35 kg
- Voltage Option: 210V
- Dimensions: 960 x 660 x 620 mm (HxWxD)
Filtration: The particulate (intake) filter is a three-stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5-micron particles.
NB: Spray particulate sizes vary from 10 to 20 microns. The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours.
Through the process of filtration, adsorption and dilution, operator exposure to concentrations of potentially hazardous substances is vastly reduced.
NOTE: These units are recirculatory, i.e. filtered air is exhausted back into the workplace.
These units are designed predominantly for studio / classroom / workshop cleanliness and for immediate operator protection against concentrations of airborne contaminants. They are not recommended for continual usage such as production applications, particularly in confined and/or badly ventilated areas. (See extraction units BV200H-D & BV100H-D for total solvent odour and gas extraction cabinets for higher specification filtration.)
Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.
For more information or advice on this product, please contact us.
