Made to order. Current lead time is 3 - 4 weeks.
BV100H-D – Hood Mounted Desktop Spray Booth Extraction Unit with Flexi-Ducts
The BV100H-D Hooded Airbrush Spray Booth captures, contains and filters for a cleaner, healthier working environment within art, graphics, design technology areas, crafts, modelling and more.
The BV100H-D can accommodate artwork up to A1 size. A1 or A2 drawing boards can be placed into the hoods at an angle for efficient overspray capture. This hooded airbrush spray booth also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
Applications include filtration/removal of:
- Solvent fumes
- Aerosol paints
- Aerosol lacquers and fixatives
- Aerosol adhesives (glue booth for Spray Mount)
- Airbrush paints and over-spray
- Cleaning solvents
- Dust
- Light grinding particles
- Soldering fumes
- Can accommodate artwork up to A1 size (841 x 594 mm).
Dimensions & Features:
- Dimensions: 960 mm x 660 mm x 62 mm (HxWxD)
- Steel construction finished in dove grey
- Fan/filter unit mounted onto hood enclosure
- Particulate filter
- 2 x centrifugal blower external rotor motor type, brushless, UL, VDE and CSA approved
- Sealed electrical wiring and switch, downstream of filters
- Flexi-ducts: 2 × 2 metres x 100mm diameter
Operation:
All BenchVent filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place the unit on a desk, bench or trolley, plug in and switch on.
For artwork applications, standard A1 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding, gluing etc. The Flexi-ducts can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience.
Specification:
- Fan Motor: 230V - 50Hz - 210W
- Air Volume at Free Air: 710 m3/hr
- Average Air Velocity at Filter Face: 0.6m/sec
- Average Air Velocity at Hood Face: 0.27m/sec
- Noise Level LAeq dB(A): 60 dB(A)
- Weight: 40 kg
- Voltage Option: 210V
- Dimensions: 960 mm x 660 mm x 62 mm (HxWxD)
Filtration:
The particulate (intake) filter is a three-stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5-micron particles.
NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-ducts, vastly reduces or eliminates operator exposures to potentially hazardous substances.
These cabinets are designed for studio / classroom / workshop cleanliness and for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-ducts.
Demonstrating adequate control of the risks to the health of employees, students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.
For more information or advice on this product, please contact us.
