Made to order. Current lead time is 3 - 4 weeks.
The BV930H-D Fume and Dust Extractor is a large hood mounted extract-to-atmosphere cabinet. Allowing the user to capture, contain, filter and expel within electronic design and rework, dental/medical labs, pharmaceutical labs, design, technology and classroom areas.
Applications of the BV930H-D include the filtration of fumes, vapour and particulates emanating from:
- Solvent fumes
- Aerosol paints
- Aerosol lacquers and fixatives
- Aerosol adhesives
- Airbrush paints and over-spray
- Conformal coatings
- Monomers
- Hazardous powders and particulates
- Resins
- Sealants
- Organic solvents and cleaning solvents
- Dust
- Light grinding particles
- Soldering fumes
The Flexi-ducts can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability and/or convenience.
Key Features:
- Internal Dimensions: 960 x 660 x 620 mm (WxHxD)
- Overall Dimensions: 960 x 740 x 720 mm (WxHxD)
- Steel construction finished in dove grey
- Fan/filter unit mounted onto hood enclosure complete with clear polycarbonate panel and hood lighting
- Particulate filter
- 2 x centrifugal blowers, external rotor motor type, brushless, UL, VDE and CSA approved
- Sealed electrical wiring and switch, downstream of filter
- 2 x Flexi-duct: 2 metres x 100mm diameter.
Operation:
All BenchVent filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place the unit on a desk, bench or trolley, plug in and switch on.
All handling and/or use of potentially harmful substances is carried out within the hood enclosure in front of the intake filter area. For artwork applications, standard A1 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture.
These fume cabinets are designed for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-ducts. Also see our recirculatory cabinets: BV660H-C and BV930H-C (higher specification filtration) where external venting is impractical.
Specification:
- Fan Motor: 230V - 50Hz - 210W
- Air Volume at Free Air: 710 m3/hr
- Average Air Velocity at Filter Face: 0.60m/sec
- Average Air Velocity at Hood Face: 0.55m/sec
- Noise Level LAeq dB(A): 60 dB(A)
- Weight: 53 kg
- Voltage Option: 210V
Filtration:
The particulate (intake) filter is a three-stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5-micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposures to potentially hazardous substances.
Demonstrating adequate control of the risks to the health of employees, students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH).
For more information or advice on this product, please contact us.
