Bloodline Latex Adhesion Promoter is a water-based acrylic resin clear intended for use as an adhesive coating direct to latex before applying Bloodline and other water-based paints.
5092 is a specialty adhesion promoter intended to match the hardness / durometer of latex. Use as a primer for painting on latex, lycra and other flexible materials to avoid paint flaking or peeling off.
Thinning:
- Thinning / reducing 5092 is not required.
Application:
- Apply with an airbrush 0.35mm tip-size or larger, or with a spray-gun
- Apply one or two very light coats
- Allow 10 to 20 minutes in between coats
- Apply Createx paints 20 minutes to 24 hours after application
- Scuffing not required prior to applying paint
- For other paint types, test before using
- 5092 appears milky in solution; dries to a clear and tacky coating which paint will adhere to, flex and not crack or chip off
- Refer to Bloodline Adhesion Promoter Tech Data Sheet for more info.
5092 may also be mixed with Createx paints for adhesion to latex. Mix 5092 ~ 25% per volume with Bloodline Colors (Bloodline 3:1 5092). Thin mix ~ 5% - 20% with 4011 Reducer.
Pot Life & Storage:
- 5092 does not have a pot-life. Store air-tight in a cool, dry environment away from direct light. Keep capped air-tight when not pouring paint.
- Long-term storage of paint is affected after mixing with 4011 Reducer. Only reduce 5092 intended for use within 48-hours.
For more information please contact us.
| Createx Flexible Adhesion Promoter 2oz (60ml) is also available as part of these sets or special offers: |
|
|
