BenchVent BV100H Recirculatory Spray Booth / Extractor
[BV100H]

£1,440.18 inc.VAT
(£1,200.15 ex.VAT)

0 in cart
BenchVent BV100H Recirculatory Spray Booth / Extractor

Made to order. Current lead time is 3 - 4 weeks.

BV100H – Hood Mounted Hobby Spray Booth Filtration Cabinet

The BV100H Re-circulatory Airbrush Spray Booth captures, contains and filters for a cleaner, healthier working environment within art, graphics, design technology areas, crafts and modelling.

The BV100H can accommodate artwork up to A1 size. A2 or A1 drawing boards can be placed into the hood at an angle for efficient overspray capture. The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.

Applications include filtration/removal of:

  • Solvent fumes - See extraction units BV200H-D & BV100H-D for total solvent odour and gas extraction cabinets for higher specification filtration
  • Aerosol paints
  • Aerosol lacquers and fixatives
  • Aerosol adhesives (glue booth for Spray Mount)
  • Airbrush paints and over-spray
  • Cleaning solvents
  • Dust
  • Light grinding particles
  • Soldering fumes
  • Can accommodate artwork up to A1 size (841 x 594 mm).

Dimensions & Features:

  • Dimensions: 960 x 660 x 620 mm (HxWxD)
  • Steel construction finished in dove grey
  • Fan/filter unit mounted onto hood enclosure
  • Particulate filter (filter particles as small as 5 microns in diameter
  • Carbon impregnated fibre filter (for odour filtration)
  • 2 x Axial fans with external rotor shaded-pole motor, impedance protected against overloading (UL, VDE and CSA approved)
  • Sealed electrical wiring and switch, downstream of filters

Operation:

All BenchVent filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place the unit on a desk, bench or trolley, plug in and switch on.

For artwork applications, standard A1 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding etc.

Specification:

  • Fan Motor: 230V - 50Hz - 105W
  • Air Volume at Free Air: 650 m3/hr
  • Average Air Velocity at Filter Face: 0.5m/sec
  • Average Air Velocity at Hood Face: 0.25m/sec
  • Noise Level LAeq dB(A): 62 dB(A)
  • Weight: 35 kg
  • Voltage Option: 210V
  • Dimensions: 960 x 660 x 620 mm (HxWxD)

Filtration: The particulate (intake) filter is a three-stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5-micron particles.

NB: Spray particulate sizes vary from 10 to 20 microns. The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours.

Through the process of filtration, adsorption and dilution, operator exposure to concentrations of potentially hazardous substances is vastly reduced.

NOTE: These units are recirculatory, i.e. filtered air is exhausted back into the workplace.

These units are designed predominantly for studio / classroom / workshop cleanliness and for immediate operator protection against concentrations of airborne contaminants. They are not recommended for continual usage such as production applications, particularly in confined and/or badly ventilated areas. (See extraction units BV200H-D & BV100H-D for total solvent odour and gas extraction cabinets for higher specification filtration.)

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.

For more information or advice on this product, please contact us.

Availability In Stock
Delivery 14 to 28 working days for orders within the UK.
Extractors are made to order and shipped direct form the factory, separately to all other items.
Please click here for shipping information for UK and overseas.

The Team / 75 Year History
About The Airbrush Company
Contact Us
Find Us
About Us
Become a Retailer
Service
Repairs
Sale / Offers
Search
All major credit and debit cards accepted through Worldpay.
Iwata Professional Airbrushes Products
Brands
Applications
Courses
Shipping
Returns
Terms
Security
PayPal
The Airbrush Company Ltd is the UK distributor of Iwata airbrushes and compressors, Medea, Zazzo, Artool, LifeColor, HR Hobbies and Premi-Air products. We also sell Createx, Wicked, Darkstar, Paasche and Badger. Airbrush Guides:
Choosing Your Airbrush
Iwata Airbrushes
Features Comparison
Airbrush Application Guide
Buyer Beware Guide
How-To Guides
Compressor Guides:
Choosing Air Source
Iwata Studio Series
Compressor Features
Compressor Applications
Airbrush Compatibility
ABC Kit Builder
Shopping Cart
Kit Cart
Checkout
My Account
Privacy
Log In
Log Out
Follow Us
Follow us on Facebook and Twitter
Copyright © 2015 The Airbrush Company Limited
Company No. 2714140. Registered Office:
79 Marlborough Road (East), Lancing Business Park,
Lancing, West Sussex BN15 8UF
Tel. +44 (0)1903 767 800   email: sales@airbrushes.com
Our Airbrush Christmas Cards in support of
Airbrush Charity Christmas Cards in aid of Cancer Research UK