Force™8 Half Mask with Typhoon™ Valve comes supplied with twin PressToCheck™ filters.
The Force™8 twin cartridge half mask with Typhoon™ valve offers superior low breathing resistance and a 4-point suspension harness with quick release buckles. The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes. The mask accepts the full range of low-profile Force™8 filters giving the Force™8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours.
Features of the Force8™ Half Mask with Typhoon™ Valve:
- Typhoon™ Exhalation Valve: Low resistance exhalation valve for easy breathing, with stable mask configuration.
- Harness: Fully adjustable 4-point cradle suspension ensuring an effective facial fit, complete with quick release buckles.
- Comfort: Durable thermoplastic rubber mask offering a superior fit to most face shapes comfortably.
- CR2 Reflectivity: Reflective strips create increased visibility in low-light environments for added safety.
- Force™ Filters: Replaceable filter cartridges. Cost effective Force™8 filters available with low profile angle for minimum visual impairment.
- Conformity: Conforms to EN140 (Face piece), EN14387:2004 (Filter performance), EN143:200 (Filter performance)
PressToCheck™ Filters: How can you be sure that you have donned your mask correctly?
With the new patent pending Force™8 PressToCheck™ filters you can instantly check that you have the correct seal every time.
- FIT IT!: Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.
- PRESS IT!: Press the front and backs of both filter covers together to stop air from entering through the filters.
- CHECK IT!: Inhale. No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.
Features & benefits:
- Daily Face Fit Reassurance
- Passes dolomite
- Protection against construction dust
- Improved hygiene
- Inhalation valve for easy maintenance
- Low profile covers protect filters
- Conforms to EN143
PressToCheck™ filters are suitable for protecting your respiratory system from:
- Solvent-based painting
- Water-based painting/airbrushing
- Rubbing down paint
How to maintain your Force™ Half-Mask: |
|
- Paint stripping
- White spirit
- Welding (ferrous and lead)
- Organic vapours and gases
- Dusts
- Mists
- Fibres and fibre glass
- Plaster
- Wood (hard and soft)
- Nuisance odours
Cleaning the mask:
Fitting the mask and "Press to Check" the fit:
Replacing the filters:
Replacement A2P3 PressToCheck™ Filters are available. Replace the filters periodically. If you start to smell the odour of the paint or it becomes difficult to draw air through the filter, then it is time to replace your cartridges. Preferably replace them before this occurs to ensure you are fully protected.
This short video shows how to fit the filters correctly. The video states the masks come attached as delivered, but please note that our stock is delivered with the face mask and filters separate so you will need to fit the filters as directed the first time.
PLEASE NOTE:
When installing the filters to your mask, please note that the filters do require a reasonable amount of force to be applied to rotate them into the “locked” position. This is to ensure that the gasket between the filters and the mask body is well compressed and therefore sealing the interface efficiently. When carrying out this operation, just take care not to grip the exhaust valve body inside the mask. However, you may hold the overall mask body with the required force to rotate the filters into the “locked” position. Do not twist both filters at the same time.
For more information or advice on this product, please contact us.
Force™8 Half Face Mask with Typhoon Valve and A2P3 PressToCheck™ Filters (Twin Respirator) contains these items: |
|
|