AutoBorne Sealer Transparent Base (960ml)

£54.06 inc.VAT
(£45.05 ex.VAT)

0 in cart
AutoBorne Sealer Transparent Base (960ml)
Createx AutoBorne

AutoBorne Transparent Sealer has the performance of other AutoBorne Sealers without the pigment. It’s a must-have product for any Createx Colors painter. Works excellently as an adhesion promoter, inter-coat and flake carrier.

AutoBorne™ Sealers are a professional, waterborne DTS (Direct To Substrate) primer for application direct to aluminium, wood and most plastics. It is not a direct-to-metal (DTM) primer. When working on bare metal, first apply a self etching DTM primer.

AutoBorne™ Sealers are waterborne sealers designed for use with waterborne and solvent borne basecoat paints. The sealers should be colour-keyed with the basecoat or mid‐coat colour to be applied for improved coverage. AutoBorne Sealers are easy to apply, dry quick, self‐level and may be dry‐sanded. As part of a complete custom system topcoat with Auto-Air Colors or Wicked Colors for a seamless colour system as well as any other type of waterborne or solvent‐based paint.

AutoBorne™ Sealers features:

  • Compatible for use with any paint type including urethane, water-based and waterborne.
  • Universally compatible with all automotive primers.
  • VOC compliant in the United States, Canada and Europe.
  • Available in a full line of colours for colour–keyed mid-coat application
  • May be used as base coat and top-coated direct
  • Excellent durability and tenacious adhesion for long lasting paint jobs
  • Resists cracking and prevents bleed through FROM underlying fillers
  • Excellent self-levelling
  • Quick to Dry
  • Easy to Sand
  • Does not require sanding prior to application of mid-coat paint and top-coat clear
  • Available in 8 oz, 16 oz, 32 oz (and 1 gallon sizes by special ORDER - please contact us)

Createx AutoBorne™ Sealers PDF:

Preparation of Substrates:

  • Harder plastics such as polystyrene may require application of an adhesion promoter prior to application of sealer.
  • Metal (except aluminium) requires a self-etching DTM primer before application of AutoBorne sealer.
  • Wash all surfaces to be painted with wax and grease remover.
  • If sanding is required, prepare surface with 600 - 800 grade sandpaper.
  • If surface is sanded, wash off all residues with wax and grease remover.


  • 70 °F / 21 °C with humidity levels under 65%
  • Best results are achieved with increased air temperatures in a non-humid environment
  • Use fans to assist air drying
  • Painting in or drying paint in lower temperatures or higher humidity levels will require extended flash and drying times.

Equipment set-up:

  • Spray gun fluid tip 1.3 - 1.4mm
  • Touch-up gun fluid tip size 0.8 - 1.2mm
  • Approx. 19 - 28 psi inlet, adjust gun for wetted coats which are not over-atomized
  • Not recommended for use with an airbrush


  • Reduce 9:1 with 4012 High Performance Reducer (approx. 10% per volume)
  • Allow reduced mixture to set 10 minutes or more prior to spraying
  • Reduction allows for a smoother finish and improved coating integrity.
  • 2 - 3 coats for complete coverage
  • Re-coat (between coats) approx. 10 minute flash time or until dried to a matte finish mid-coat (or base coat), approx. 60 minutes.
  • Use air flow or heat (175°F or less) to assist flashing between coats
  • Re-coat paint after approximately 30 minutes drying time
  • Dry to sand after approximately 60 minutes for best shaving. Dry sand only.
  • Use of heat reduces dry times. Do not exceed 175 F°
  • Dry sand with 800 - 1000 grit paper
  • Sanding is not required prior to application of paint or top-coat clear
  • Dry Sand Only. Do not wet sand.

Availability Temporarily Out of Stock
You may buy now and the product will be placed on back order to be dispatched as soon as it is available.
Please click here for back order information.
Delivery 5 to 20 working days for orders within the UK.
This product may be coming back into stock sooner. Please contact us for a more accurate estimate of availability for this specific product.
Alternatives Please click here for all sizes. Please consider the alternative sizes.