This 24mm bottle adapter fits straight onto a Createx or an Iwata bottle. It comes with a straw of approximately 10cm length that you can cut down to the required length.
The adpater fits Iwata bottle-fed airbrushes, Badger airbrushes and the Paasche VL airbrush.
The 20mm bottle adpater is also available. If you are not sure which is the correct adapter, please measure the diameter of the neck of your Createx or Iwata bottle or the inside diameter of the bottle cap.
Createx AutoAir is an airbrush paint designed for automotive application. Createx "Classic" is a multi-purpose airbrush paint, originally designed for textiles and suitable for medium to large nozzle sizes. Do not connect this bottle adapter straight to a bottle of media until you have checked that the paint is thinned to the appropriate viscocity for your airbrush. As a general guide we recommend a 'milky' consistency. However, if you would like any advice whether a partiulcar paint is suitable for a particular airbrush, then please contact us.
If you need further advice about this product please contact us.
This part optionally fits the following models:
Click on each to view parts diagram and full parts list