Iwata Studio Series compressors are powerful, compact and quiet. With oil-less piston motors, they are low maintenance and affordably priced. The Iwata Studio Series are the perfect companion to any of the Iwata airbrushes.
Like its name suggests, the Power Jet Plus Handle Tank compressor features a 480cc air tank inside the handle. It is also more powerful than a Power Jet Lite, so the Power Jet Plus Handle Tank can run between two and four Iwata airbrushes or similar airbrushes at the same time, or a small spray gun. (a multiple-outlet manifold is additionally required to connect more than one airbrush)
Applications:
Click here to view a guide to which applications this compressor is best suited for.
The Power Jet Plus Handle-Tank features:
- Low maintenance, oil-less twin piston air compressor
- 1/4 HP induction motor
- 480 cc air tank inside the handle
- Air flow at 0 psi: 1.4 CFM (40 lpm)
- Working pressure from 0 psi to 60 psi.
- Smart Technology automatic switching reduces running time and motor wear (40 psi on / 60 psi off)
- Moisture filter
- Pressure gauge
- Air regulator for precise air pressure adjustment
- Comes with a 3 metre (10') braided hose
- One 1/4 BSP outlet
- Built in spray gun holder
- On/off switch
- Size: L 34 x W 17 x H 26 cm (approx including handle and fittings)
- Weight: 7.3 kg
- Voltage: 220-240V 50Hz
- Noise level: 56 - 58 decibels
- Duty cycle: 60 minutes continuous use. Please allow the motor to rest for at least 20 minutes after each cycle of continuous use.
Click here to compare these features to other Iwata compressors.
The Power Jet Plus Handle-Tank is suitable for running between two and four of the following or other similar fine airbrushes concurrently (depending on the type of application, the airbrush models, the required airflow and required pressure. Please call for specific advice) :
(a multiple-outlet manifold is additionally required to connect more than one airbrush)
- Neo for Iwata CN, BCN, TRN1, TRN2
- Iwata Revolution BR, CR, SAR, BCR, TR1, TR2, M1, M2
- Iwata Eclipse BS, CS, SBS, BCS (except G6)
- Iwata HP
- Iwata HP-Plus
- Iwata Hi-Line
- Iwata Hi-Line HP-TH (will only run one)
- Iwata Custom Micron
- Iwata Kustom series (or one HP-TH)
- Paasche CC
- Paasche F
- Paasche Talon
- Paasche V
- Paasche VJR
- Paasche VSR90
- Paasche VV
- Badger 100
- Badger 150
- Premi Air G35
- Sparmax SP35, SP35C, MAX-3, MAX-4, HB-040, SP-20X, DH-125
- Sparmax GP-35, GP-50
The Power Jet Plus Handle-Tank is suitable for running two of the following airbrushes, small spray guns or similar:
(a multiple-outlet manifold is additionally required to connect more than one airbrush)
- Paasche H
- Paasche HS
- Paasche VL
- Paasche VLS
- Paasche MIL-SET
- Badger 150 HD
- Badger 155
- Badger 175
- Badger 200
- Badger 250
- Badger 260
- Badger 350
The Power Jet Plus Handle-Tank is suitable for running one of the following airbrushes, small spray guns or similar:
- Iwata Eclipse G3, G5, G6
- Iwata RG-3 (with fan: at lower pressures only)
- Iwata LPH-50 (at low pressures for tanning only)
- Iwata Hi-Line HP-TH
- Paasche AEC
- Asturo C3, C5, CV5, C7 (at low pressures for tanning only)
- Sparmax GP-850
- Flake King 500
Click here for a chart showing which airbrushes this compressor can run in comparison to other Iwata compressors.
If you require further advice on choosing the most suitable equipment for you needs and budget, or if you have any doubt about the compatibility between equipment you are buying and equipment you already own, then please contact us.
More information:
| Iwata Studio Series Power Jet Plus Handle Tank compressor is also available as part of these sets or special offers: |
|
|
| Click on each product for more information |
